ATV21WD37N4 - Altivar - ATV212 37kw 50hp 460v tri ip54 variateur - Schneider
ATV21WD37N4 - Altivar - ATV212 37kw 50hp 460v tri ip54 variateur - Schneider
ATV21WD37N4 - Altivar - ATV212 37kw 50hp 460v tri ip54 variateur - Schneider
ATV21WD37N4 - Altivar - ATV212 37kw 50hp 460v tri ip54 variateur - Schneider

ATV21WD37N4 - Altivar - ATV212 37kw 50hp 460v tri ip54 variateur - Schneider

SCHNEIDER
ATV21WD37N4
Rupture de stock
2 397,23 € HT

2 876,68 € TTC
Altivar - ATV212 37kw 50hp 460v tri ip54 variateur

**** IMPORTANT ****

Cher client, avant toute commande, nous vous prions de tenir compte d'un délai d'approvisionnement moyen de 72h.  Nous vous remercions de votre confiance et vous souhaitons un très bel été.

Description

Remplacé par ATV212WD37N4

Range of product : Altivar 21

Product or component type : Variable speed drive

Product destination : Asynchronous motors

Product specific application : Pumps and fans in HVAC

Assembly style : With heat sink

Component name : ATV21

EMC filter : Class A EMC filter integrated

Power supply voltage : 380...480 V - 15...10 %

Network number of phases : 3 phases

Motor power kW : 37 kW

Motor power hp : 50 hp

Line current : 54.4 A at 480 V

  68.9 A at 380 V

Speed range : 1…10

Transient overtorque : 120 % of nominal motor torque +/- 10 % for 60 s

Power supply voltage limits : 323…528 V

Power supply frequency : 50...60 Hz - 5...5 %

Power supply frequency limits : 47.5…63 Hz

Apparent power : 52 kVA at 380 V

Maximum prospective line Isc : 22 kA

Maximum continuous output current : 79 A at 380 V

  79 A at 460 V

Maximum transient current : 86.9 A for 60 s

Speed drive output frequency : 0.5…200 Hz

Nominal switching frequency : 8 kHz

Switching frequency : 6...16 kHz adjustable

  8...16 kHz with derating factor

Speed accuracy : +/- 10 % of nominal slip for 0.2 Tn to Tn torque variation

Torque accuracy : +/- 15 %

Regulation loop : Adjustable PI regulator

Motor slip compensation : Adjustable

  Automatic whatever the load

  Not available in voltage/frequency ratio motor control

Diagnostic : 1 LED (red)DC bus energized:

Output voltage : <= power supply voltage

Insulation : Electrical between power and control

Recommended type of cable for mounting in an enclosure : With UL Type 1 kit: 3 wire(s)UL 508 cable at 40 °C, copper 75 °C / PVC

  Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 70 °C / PVC

  Without mounting kit: 1 wire(s)IEC cable at 45 °C, copper 90 °C / XLPE/EPR

Electrical connection : VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES: terminal 2.5 mm² / AWG 14

  L1/R, L2/S, L3/T: terminal 50 mm² / AWG 1/0

Tightening torque : 0.6 N.m (VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)

  24 N.m, 212 lb.in (L1/R, L2/S, L3/T)

Supply : Internal supply: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection

  Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection

Analogue input number : 2

Analogue input type : VIA switch-configurable current: 0...20 mA, impedance: 242 Ohm, resolution 11 bits

  VIA switch-configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits

  VIB configurable PTC probe: 0...6 probes, impedance: 1500 Ohm

  VIB configurable voltage: 0...10 V DC 24 V max, impedance: 30000 Ohm, resolution 11 bits

Sampling duration : F 2 ms +/- 0.5 ms for discrete input(s)

  R 2 ms +/- 0.5 ms for discrete input(s)

  RES 2 ms +/- 0.5 ms for discrete input(s)

  VIA 2 ms +/- 0.5 ms for analog input(s)

  VIB 2 ms +/- 0.5 ms for analog input(s)

Response time : FLA, FLC 7 ms +/- 0.5 ms for discrete output(s)

  FLB, FLC 7 ms +/- 0.5 ms for discrete output(s)

  FM 2 ms +/- 0.5 ms for analog output(s)

  RY, RC 7 ms +/- 0.5 ms for discrete output(s)

Accuracy : +/- 1 % (FM) for a temperature variation 60 °C

  +/- 0.6 % (VIA) for a temperature variation 60 °C

  +/- 0.6 % (VIB) for a temperature variation 60 °C

Linearity error : FM: +/- 0.2 % for output

  VIA: +/- 0.15 % of maximum value for input

  VIB: +/- 0.15 % of maximum value for input

Analogue output number : 1

Analogue output type : FM switch-configurable current 0...20 mA, impedance: 500 Ohm, resolution 10 bits

  FM switch-configurable voltage 0...10 V DC, impedance: 470 Ohm, resolution 10 bits

Discrete output number : 2

Discrete output type : Configurable relay logic: (FLA, FLC) NO - 100000 cycles

  Configurable relay logic: (FLB, FLC) NC - 100000 cycles

  Configurable relay logic: (RY, RC) NO - 100000 cycles

Minimum switching current : 3 mA at 24 V DC for configurable relay logic

Maximum switching current : 2 A at 250 V AC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)

  2 A at 30 V DC on inductive load - cos phi = 0.4 - L/R = 7 ms (FL, R)

  5 A at 250 V AC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)

  5 A at 30 V DC on resistive load - cos phi = 1 - L/R = 0 ms (FL, R)

Discrete input type : F programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm

  R programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm

  RES programmable 24 V DC, with level 1 PLC, impedance: 3500 Ohm

Discrete input logic : Negative logic (sink) (F, R, RES), >= 16 V (state 0), <= 10 V (state 1)

  Positive logic (source) (F, R, RES), <= 5 V (state 0), >= 11 V (state 1)

Acceleration and deceleration ramps : Automatic based on the load

  Linear adjustable separately from 0.01 to 3200 s

Braking to standstill : By DC injection

Protection type : Against input phase loss: drive

  Break on the control circuit: drive

  Input phase breaks: drive

  Line supply overvoltage and undervoltage: drive

  Line supply undervoltage: drive

  Overcurrent between output phases and earth: drive

  Overheating protection: drive

  Overvoltages on the DC bus: drive

  Short-circuit between motor phases: drive

  Thermal power stage: drive

  Motor phase break: motor

  Thermal protection: motor

  With PTC probes: motor

  Against exceeding limit speed: drive

Insulation resistance : >= 1 mOhm 500 V DC for 1 minute

Frequency resolution : Analog input: 0.024/50 Hz

  Display unit: 0.1 Hz

Connector type : 1 RJ45

Physical interface : 2-wire RS 485

Transmission frame : RTU

Transmission rate : 9600 bps or 19200 bps

Data format : 8 bits, 1 stop, odd even or no configurable parity

Number of addresses : 1…247

Communication service : Time out setting from 0.1 to 100 s

  Write single register (06)

  Monitoring inhibitable

  Read holding registers (03) 2 words maximum

  Write multiple registers (16) 2 words maximum

  Read device identification (43)

Marking : CE

Operating position : Vertical +/- 10 degree

Height : 880 mm

Width : 284 mm

Depth : 343 mm

Détails du produit

Neuf

Pour faciliter votre navigation et vous apporter un meilleur service nous utilisons des cookies. En poursuivant votre navigation , vous acceptez l'utilisation de cookies.